1, wind oil essence: use a cotton swab or rag dipped in wind oil essence, smear on the edge of the happy character, waiting for the wind oil essence can be easily torn off after penetration;
2. Hair dryer: Set the hair dryer to hot, blow and bake against the sticker for a while, and remove the happy character after the sticker becomes soft;
3. Nail polish remover: Put a face towel in the cup, soak it with nail polish remover, cover it on the happy offset printing, wait for a moment, wipe with a sponge to remove the happy character.
First, how to remove the happy word affixed to the car windshield
1. Wind oil essence
Use a cotton swab or rag dipped in the spirit of oil, smear on the edge of the happy character, wait for the spirit of oil after penetration can be easily torn off, alcohol, toothpaste the same.
2. Hair dryer
The hair dryer is set to hot, and the sticker is blown and baked for a while. After the sticker becomes soft, the happy character can be removed.
3. Nail polish remover
Put a face towel in the cup, soak it with nail polish remover, cover it on the offset printing, wait for a moment, wipe with a sponge to remove the happy character.
4. Rosin water
With a rag dipped in the appropriate amount of rosin water, repeatedly wipe the imprint part, can quickly remove the offset.
5. Erasers
Wet the offset print with hot water, then wipe it back and forth with an eraser, and repeat it several times to remove it.
6, professional cleaning agent
You can buy professional happiness cleaning agent from the Internet, spray on the happiness mark, and wipe with a towel after softening.
Two, glass happy word how to stick without leaving marks
1, wet paste
Before affiasing the happy character, wipe the windshield with a wet cloth, and then affix the happy character, which is very firm and not easy to fall.
2. Electrostatic sticker
Silent happiness stickers are transparent electrostatic film material, can be well fitted to the glass, and leave no trace.
Three, how to stick glass happiness
1, wipe the glass clean, spray the right amount of water;
2. Put the electrostatic happy letter on the glass sprayed with water;
3. Press the happy character window cut by hand to discharge the bubbles;
4, then use the watering can to spray appropriate amount of water under the electrostatic sticker;
5. Repeat the above actions to make the electrostatic sticker closely fit on the glass.